When it came to implementing a solution, Mr. Nesbitt had an idea of what functionality that he wanted. Although not mandated by Health Canada, Mr. Nesbitt wanted to ensure quality control issues met the highest possible standards as part of his commitment to top-of-class food services. This wish list included an easy-to use temperature-monitoring system that could provide a visible display of the temperatures of all of his refrigerators and freezers, including historical information so that he could review the performance of his equipment. It also had to provide alert notification (but email alerts and SMS text message alerts) to alert key staff in the event that a cooling system was exceeding pre-set warning limits.

While the many benefits of environmental sensors for preventing damage to assets and equipment, automation, IT management and smart facilities are well documented and commonly discussed, many businesses are still unsure as to whether a wired or wireless system is best for their goals.

The 4-20 mAmp Voltage Converter is used to integrate the Base Units with a 4-20 mAmp transmitter. 4-20 mAmp Voltage Converter technology is used to communicate analog signals over long distances where electrical interference is a problem. This solution is often used in the process control industry to collect the analog values from a wide array of remote sensors. Current signals are much less susceptible to noise than voltage signals. A voltage signal can be converted to current and then broadcast over a long distance before it is converted back to voltage and read by the Base Unit.4-20 mAmp Voltage Converter transmitters are common in the industry for use with high quality sensors. With the 4-20 mAmp Voltage Converter these sensors can now be integrated into the Base Unit enhancing their value with the addition of graphing, web interface, email interface, thresholds, and limits.It works with all SensorHawk Base Units and SecurityHawk Base Units and must be connected to a base unit in order to function properly.ACCESSORY FEATURESView from any web browserQuick and simple set-up and configurationReceive email and SMS alert notificationsSupports SNMP pollingEasy firmware updatesSPECIFICATIONSConverts current levels from 4“ 20 mA to 0.8“ 4.0 V voltage level2 LED show status of the current loop and the power supplyLength: 1.5 meters (5 feet)Maximum Extension Cable Length: 305m (1000 feet) with standard CAT 5 cableMaximum Linearity: ± 0.09%Input Current Range: +4 mA to +20 mAOutput Voltage Range: +0.8 V to +4.0 VMaximum Accuracy: ± 0.15% Full Scale (± 0.3% Full Scale, Maximum)Power Supply: +5 V DCPower Consumption: 25 mWOperating Temperature: -40°C to 85°CInput Connector: two terminal, Iin(+) and Iin(-), for current loopOutput Connector: RJ45 jack to converter using UTP Cat 5 wireDimensions: 6.5cm (2.6 in) x 6.2cm (2.4 in) x 1.5cm (0.6 in)Weight: 80 grams (2.8 oz)

Worried about water leaks, sprinkler systems or floods? Detect these conditions quickly with this water/liquid detection sensor. This Liquid Detection Sensor is much more precise than most commercially-available water sensors, and can even detect the presence of distilled water.SMART SENSOR FEATURESView from any web browserQuick and simple set-up and configurationReceive email and SMS alert notificationsSupports SNMP pollingEasy firmware updatesSPECIFICATIONSNo calibration required.Sensor can function while immersed in water.Length: 4.5 meters (15 feet)Maximum Extension Cable Length: If you require lengths exceeding 15 feet, please contact us for special pricing.Sampling Rate: 3 Readings per Second (Minimum)Temperature Measurement Range: -40°C to +75°C (-40°F to +167°F)Measurement Range: Wet or Dry / -20°C to +60°C (-4°F to +140°F)Sensor Type: Microprocessor Controlled Capacitance Measurement TechnologyDisconnect Alarm: Relay alert if sensor becomes interrupted or disconnected.

Dual-purpose Water Resistant Temperature & Humidity Smart Sensors can measure both temperature and humidity.You can even poll temperature and humidity values from a network management system with integrated SNMP trap and polling support (MIB file supplied).SMART SENSOR FEATURESView from any web browserQuick and simple set-up and configurationReceive email and SMS alert notificationsSupports SNMP pollingEasy firmware updatesSPECIFICATIONSNo calibration required.Length: 0.3 meters (1 foot)Maximum Extension Cable Length: 305m (1000 feet) with standard CAT 5 cableSampling Rate: 1 Reading per SecondTemperature Measurement Range: -40°C to +75°C (-40°F to +167°F)Temperature Measurement Accuracy: ±0.2°C (±0.4°F)Temperature Measurement Resolution: 0.1°C (0.1°F)Humidity Measurement Range: 0 to 100% Relative HumidityHumidity Measurement Resolution: ±1%Humidity Accuracy: at 25°C: ±5%

CloudHawk is a cloud service for remote and multi site environmental monitoring brought to you by Enviromon, a division of Netmon Inc.CloudHawk expands the already capable environmental monitoring solutions by Enviromon to allow you access to your sensor data in real time as well as historical data.It allows you access to manage and modify alerts including setting up SMS alerts only found in CloudHawk.CloudHawk also allows a great centralized view and organization for multiple locations / sites of your business. All of these features can be accessed by any smartphone, tablet or laptop with a modern browser and internet connectivity on it.

Monnit Corporation was established to capitalize on the emerging trend of connecting to, monitoring and controlling machines and other “things” in our environment. Monnit has designed a simple, easy to install wireless sensor solution for a wide variety of applications. Whether you are a small business or a large corporation, Monnit can help manage your building operations, increase your operating efficiencies and help manage and protect your assets.