Fundacio Puigvert, a leading European medical center specializing in Urology, Nephrology, and Andrology, faced a significant challenge in training its surgical residents. The institution recognized the need for a more standardized and comprehensive training curriculum, particularly in the area of robotic surgery. The challenge was underscored by two independent studies showing that less than 5% of residents in Italian and German residency programs could perform major or complex procedures by the end of their residency. The institution sought to establish a virtual reality simulation lab that would include endourological, laparoscopic, and robotic platforms. However, they needed a simulator that could replicate both the hardware and software of the robotic Da Vinci console used in the operating room, without being connected to the actual physical console. They also required a system that could provide both basic and advanced simulation training, and a metrics system to assess the proficiency of the trainees before they performed surgical procedures in the operating theater.

Lower oil prices compel oilfield operators to increase efficiency. The client, a leading oilfield services provider, sought to significantly reduce the costs of pumping oil. The client owns and operates tens of thousands of electric submersible pumps (ESPs) for its global oil-and-gas customers.

A Linux driver was build to catch information from the camera chip and show it on i.MX board with LCD screen. The system included me.MX board with camera chip. This framework could be utilized as a part of a vehicle infotainment system that is coordinated with GPS. Our solution gives connectivity to smartphones by means of Bluetooth and furthermore underpins a rear camera and a display system for parking assistance.

Shannon Gomes, owner of Cedar Basin Corp Consulting, has long been searching for a better way to monitor nitrogen (N) available and provide precise N recommendations. He has tried "all the different nitrogen management tools", with varying results, but has never been satisfied. He is looking for a real-time, location-specific adaptive N recommendation model that accounts for weather, management practices, and field variability.

If the embedded developer is using an Intel Quark or the next generation smaller class product to power an IoT device, one of the biggest problems they face today is which IoT communication protocol to adopt. Dozens of new wired and wireless schema are competing to own the network, data and physical layers. Several consortia have emerged to describe new reference architectures for communicating between IoT devices and clouds. And there are many solid legacy protocols with strong track records. From the developer’s perspective, it may feel like the risk is so high of choosing the wrong protocol that it might as well be a no-fly zone.

Minimise the risk of an interruption to global operations, and better support the efforts of end users without adding complexity or increasing management burden.

The A.P. Plasman Corporation manages multiple facilities with multiple processes, and when they were looking for an automation solution for their paint facility in Tecumseh, they were looking for a solution that could restrict access, deploy easily, and provide the ability to modify the application quickly to suit changing needs.

Monaco’s sanitation department uses alarm software to monitor its water treatment facilities. With connections to the waste water networks, the main lifting stations, three storm overflows, a storm tank, as well as waste water pre-treatment and final treatment operations, the department can rest assured that they know exactly what is – and what is not – being put back into the ocean on a regular basis.

The company challenges are as follows:Time-consuming manual data entries of temperature, pressure, moisture, etc., in PDF Inefficient data tracking & migration to another serverLack of a central repository to store the data in real-timeUnable to generate the certificate in a no-network zoneUnable to update the information on-the-go

A large U.S. heavy equipment manufacturer and logistics company sell its vehicles to dealers who, in turn, rent or sell them to individual customers. An antiquated, on-premises data center made maintaining and managing its 400,000 pieces of heavy equipment a challenge.This outdated environment also made it difficult to scale its vehicle monitoring capabilities, assess vehicle health proactively and capture analytics for insights into performance across the company. With its legacy data center at capacity and the high licensing fees associated with available marketplace solutions, the manufacturer needed a partner to help transform its business operations.

Disaster management, for the past few decades, has taken an unreliable and hardly scalable approach to addressing significant natural catastrophes.

Driving is a core part of Balfour Beatty’s business and managing risk on site and on the road is a high priority for the organisation.

As the automotive industry continues to tighten product development timelines, compressing design time in the supplier network has been the go-to model to achieve desired results. Traditionally, to successfully address the economics of part production, Delphi has used technologies like injection molding to deliver parts at scale. The cost of tooling development and time associated has limited part production to be focused on mass-production only.

Onesti City Hall current data center infrastructure is manly used for internal use and adding more servers and licenses rise the cost of public expenditure. Additionally, Onesti City Hall wants a secure system that will can interact with the local community to rise the engagement of the citizens using their mobile devices.

Having no unplanned outages in multi-unit power plants throughout the late spring, the summer and the early fall months is challenging in the hot Texas weather. An unplanned outage during these months could mean having to purchase replacement power at spot market prices, which could be spiking during the outage. Knowing when and for how long to overload the equipment in power plants is a significant part of operating strategy. Operators need accurate estimates of motor driven pump and fan loading levels to determine operating limits.

Intermatic needed a solution to help their customers drastically reduce costs associated with making sure all billboard lights were on and working properly. The traditional method was costly, time consuming and inefficient as may billboards are located in isolated regions.

In line with their Industry 4.0 development initiative, the Siemens factory in Nanjing felt that using phone calls as the primary method for reporting and calling for action was not acceptable for long-term development goals. In addition, phone calls do not create any data that can be stored for future referencing.

Devicify required a means to quickly build "connected IoT apps” without building a connected applications platform themselves, an expensive and time consuming option.There is a need for Devicify's Connected Products Management (CPM) product to create agile development environments for both technical and business users within a given company. Johnson notes that speeding up the software development process is critical, but the larger value is in combining this with agility in adapting processes that support new business services. Johnson suggests that the resulting new strategic differentiators are what will drive business transformation within the IoT space.Business users and customers stand to gain tremendously from the effective use of Devicify CPM because the technical users are able to easily and quickly develop the software needed to create full end to end solutions. Devicify specifically engaged with ThingWorx so that these technical users could easily connect the edge devices and end points established by the connected products themselves to the business processes and applications they fed into to create the innovative business services that ultimately serve as strategic business differentiators.

Difficult to monitor the cold storage conditionHard to send out alarm/report for the temperature of perishable products timely

ABB needed a partner familiar with the organization and SAP implementation to extend existing SAP system to IMA and support/improve SAP usage.

Following rapid growth since its launch in 2008, Phicomm required a standardized approach to service management to replace the previous manual processes and enable IT service delivery to be more productive and efficient.

To develop its next-generation flight management systems, CMC sought a new object-oriented, model-based process that would help comply with the DO-178C and ARP 4754A/4761 aviation industry standards.Over the years, CMC has developed a comprehensive range of FMS products, designed to meet the specific needs of different sectors of the aviation market. The benefit of this approach was that each product satisfied a unique set of requirements – but from a systems and software engineering perspective, it takes more time and effort to develop and maintain separate software for each target market.

J.A. Becker & Söhne is a medium-sized German company, that always prioritizes quality and safety. In their old model, a technician travels regularly to the customer’s location to service the compressors. For the international customers, trained service partners assume this regular maintenance role. In case of an issue between the service visits, there is a service hotline at the customers disposal, that is able to solve most of the failures. In cases where the hotline cannot solve the problem remotely, a service technician is sent to the customer. With customers all over the world (including China), this support option is quite time-consuming and very expensive. 

Virtustream has deep SAP expertise, helping enterprises take advantage of cloud economics with its xStream-powered infrastructure-as-a-service (IaaS) offerings. Virtustream specializes in cloud and hosting services for SAP, with nearly 500 SAP HANA instance migrations to date. It was the first service provider to offer SAP and SAP HANA in a multitenant cloud. To meet the security, compliance, performance, and efficiency requirements of complex production applications in the cloud, Virtustream selected the Cisco Unified Computing System™ (Cisco UCS®) and Cisco® networking technology for its data centers.

CLC needed a legacy solution for continued support of the thousands of laser systems currently in use across the globe. It seemed I had run into a brick wall and would have to spend thousands in material and engineering costs to offer retrofit solutions for these products.

No project is like another in the field of engineered solutions for escape and rescue chambers and fire simulation. Systems are tailored exactly to customers' requirements.

As Europe’s second largest airline, Air France-KLM wanted to harness the latest technology innovations to help enhance the user experience of its many passengers, as well as support new aircraft as they were added to the company’s expanding fleet. Tata Communications’ global network was able to help.Air France-KLM’s business desired up-to-date organization-wide digital transformation. While its current customers wanted to fly on next-generation aircraft, Air France-KLM knew it also needed to expand into emerging markets and make the most of global travel opportunities opening up to it.The challenge was that Air France-KLM’s technology infrastructure needed to be improved to enhance the passenger experience and also needed to integrate cloud services and new applications to support huge amounts of data coming from next-generation aircraft.

Machine service and maintenance have been a standard in the machine manufacturing industry for years. If you manufacture a substantial amount of machines that are shipped all over the world, you’ll need a remote access solution to keep track of them and to provide high-quality service. It is not unique, however, which is why Water IQ went looking for a partner with whom they could dive into the world of cloud and automation.Water IQ had far-reaching ambitions early on, aiming to stay ahead of the competition. “We strive to provide solutions that can increase a customer’s company value using water, for example by improving the product quality or production efficiency,” Freddy explains.To realize these ambitions, they needed a platform where they could access machine data. “That simply requires a data logging and analysis system.”

ORBIS Corporation strives to make a positive difference in communities in which it operates and it is committed to improving the environment. In 2010, ORBIS launched its first Annual Sustainability Report to ensure they provide solutions that both create economic value and are as friendly to the environment as possible.With electricity prices rising year after year, ORBIS was determined to reduce their energy demand and cut costs.

Technology to support vessels in the commercial fishing industry had not changed significantly since the advent of radar. Over the past 40 years commercial fishing in the United States has continued to be one of the most active, yet regulated industries. The combination of federal regulations and lack of technology created an opportunity for Faria Watchdog to go-to-market with a solution.